
Adam Foster
Fractional RevOps
ESSAY
Hiring More Salespeople Won't Fix a Leaky Sales Process
Hiring More Salespeople Won't Fix a Leaky Sales Process
Hiring More Salespeople Won't Fix a Leaky Sales Process
5 min
When the number is behind, the instinct is to hire. But if deals are leaking out of the middle of the pipeline, more people at the top just means more leaks.
When the number is behind, the instinct is to hire. But if deals are leaking out of the middle of the pipeline, more people at the top just means more leaks.
“Before you add headcount, find out where the deals you already have are going.”
When the number is behind, the board’s first question is usually how many more salespeople you need. It’s a fair question. It’s also often the wrong one.
Hiring is slow and expensive. If the problem is that you don’t have enough conversations, hiring might be the right answer. If the problem is that good conversations aren’t turning into revenue, it makes things worse.
The real cost of a new sales hire
The salary is the visible part. Underneath it are recruiter fees, months spent finding the right person, and a ramp-up period where they cost money and bring in little. Then there’s the time a sales manager spends onboarding them, which is time not spent coaching the people already closing deals.
None of that is a reason not to hire. It’s a reason to be sure the new person will be joining a process that can turn their effort into revenue. If deals already leak out of the middle of the pipeline, a new rep will simply generate more deals that leak.
Look at the middle of the pipeline first
Before I’d sign off on a new hire, I’d want to know a few things about the deals you already have.
Where do they stall? Most pipelines have one stage where deals pile up and quietly go stale.
Why are they lost? Not the reason in the dropdown, which is usually “price” or “no decision”. The real reason, from talking to the rep and ideally the buyer.
How long do they take? If the sales cycle has stretched over the last year, more reps won’t shorten it.
If you can’t answer those from your CRM in under ten minutes, that’s the first thing to fix. It’s also a lot cheaper than a recruiter’s fee.
Common leaks in the sales process
In my experience the answers are rarely dramatic. They’re small, boring problems that cost deals every month:
Slow lead response. Leads from marketing sit untouched for days because nobody is sure who owns them. By the time someone calls, the buyer has spoken to a competitor.
No owner for follow-up. A proposal goes out and the next step is “chase in a week”, which becomes three weeks, which becomes a lost deal marked “no decision”.
Slow quoting. Quotes take a week because they’re built by hand in a spreadsheet, and the buyer’s urgency drains away while they wait.
Poor qualification. Reps carry deals that were never going to close, so their time is spread across too many opportunities and the good ones get less attention.
Fix those and you’ve effectively added capacity to the team you already have. Your existing reps close more of what they’re already working on.
How to find the leaks in your CRM data
You don’t need a big analysis project. Four reports will show you most of it:
Stage conversion rates. What percentage of deals move from each stage to the next? A sharp drop between two stages is your leak.
Average time in stage. Where do deals sit longest? Compare won deals with lost ones. Lost deals usually stall somewhere specific.
Lead response time. How long between a lead arriving and the first sales activity? If you can’t report on this, that tells you something too.
Lost reasons with notes. Read the last twenty lost deals properly. The pattern is usually obvious once you look.
Fix the leaks in the right order
Once you’ve found the leaks, resist the urge to fix them all at once. Start with the one closest to revenue. A problem at proposal or quoting stage costs you deals that are almost won, so fixing it pays back fastest. A problem at the top of the funnel matters too, but the payback takes longer to show.
For each fix, agree one number that should move and check it a month later. If lead response time was three days, the target might be same day. If proposals were chased after a week, the target might be a follow-up meeting booked before the proposal is even sent. Small, measurable changes build confidence with the board far faster than a big restructure.
Questions to ask before you approve a sales hire
If you’re a managing director or on the board, these are worth asking before you sign off on the headcount:
What’s our conversion rate at each stage, and how has it changed in the last year?
How many qualified opportunities does each rep handle today, and how many could they handle?
What will the new rep do in their first ninety days, and who will train them?
How will we know by month six whether the hire is working?
If those questions are hard to answer, the business probably isn’t ready to get full value from a new salesperson yet.
When hiring is the answer
Sometimes it is. If your reps are at capacity, converting well and still can’t cover the market, you need more people. The point isn’t to never hire. It’s to know which problem you have before you spend money on the solution.
A simple test: if your best rep had twice as many leads tomorrow, would they close twice as much? If yes, hire. If they’d drown in admin, chasing and quoting, fix that first.
If you do hire, set them up to succeed
When the time comes, a new salesperson ramps faster when there’s something to learn from. A written sales process with clear stage definitions, a CRM that shows them what to do next, and reporting that tells their manager where they need help. Without those, they’ll copy whatever the rep next to them does, including the workarounds.
That’s the real return on fixing the process first. It makes the team you have more productive now, and it makes every future hire more productive too.

Adam Foster
Fractional RevOps
ESSAY
Hiring More Salespeople Won't Fix a Leaky Sales Process
Hiring More Salespeople Won't Fix a Leaky Sales Process
Hiring More Salespeople Won't Fix a Leaky Sales Process
5 min
When the number is behind, the instinct is to hire. But if deals are leaking out of the middle of the pipeline, more people at the top just means more leaks.
When the number is behind, the instinct is to hire. But if deals are leaking out of the middle of the pipeline, more people at the top just means more leaks.
“Before you add headcount, find out where the deals you already have are going.”
When the number is behind, the board’s first question is usually how many more salespeople you need. It’s a fair question. It’s also often the wrong one.
Hiring is slow and expensive. If the problem is that you don’t have enough conversations, hiring might be the right answer. If the problem is that good conversations aren’t turning into revenue, it makes things worse.
The real cost of a new sales hire
The salary is the visible part. Underneath it are recruiter fees, months spent finding the right person, and a ramp-up period where they cost money and bring in little. Then there’s the time a sales manager spends onboarding them, which is time not spent coaching the people already closing deals.
None of that is a reason not to hire. It’s a reason to be sure the new person will be joining a process that can turn their effort into revenue. If deals already leak out of the middle of the pipeline, a new rep will simply generate more deals that leak.
Look at the middle of the pipeline first
Before I’d sign off on a new hire, I’d want to know a few things about the deals you already have.
Where do they stall? Most pipelines have one stage where deals pile up and quietly go stale.
Why are they lost? Not the reason in the dropdown, which is usually “price” or “no decision”. The real reason, from talking to the rep and ideally the buyer.
How long do they take? If the sales cycle has stretched over the last year, more reps won’t shorten it.
If you can’t answer those from your CRM in under ten minutes, that’s the first thing to fix. It’s also a lot cheaper than a recruiter’s fee.
Common leaks in the sales process
In my experience the answers are rarely dramatic. They’re small, boring problems that cost deals every month:
Slow lead response. Leads from marketing sit untouched for days because nobody is sure who owns them. By the time someone calls, the buyer has spoken to a competitor.
No owner for follow-up. A proposal goes out and the next step is “chase in a week”, which becomes three weeks, which becomes a lost deal marked “no decision”.
Slow quoting. Quotes take a week because they’re built by hand in a spreadsheet, and the buyer’s urgency drains away while they wait.
Poor qualification. Reps carry deals that were never going to close, so their time is spread across too many opportunities and the good ones get less attention.
Fix those and you’ve effectively added capacity to the team you already have. Your existing reps close more of what they’re already working on.
How to find the leaks in your CRM data
You don’t need a big analysis project. Four reports will show you most of it:
Stage conversion rates. What percentage of deals move from each stage to the next? A sharp drop between two stages is your leak.
Average time in stage. Where do deals sit longest? Compare won deals with lost ones. Lost deals usually stall somewhere specific.
Lead response time. How long between a lead arriving and the first sales activity? If you can’t report on this, that tells you something too.
Lost reasons with notes. Read the last twenty lost deals properly. The pattern is usually obvious once you look.
Fix the leaks in the right order
Once you’ve found the leaks, resist the urge to fix them all at once. Start with the one closest to revenue. A problem at proposal or quoting stage costs you deals that are almost won, so fixing it pays back fastest. A problem at the top of the funnel matters too, but the payback takes longer to show.
For each fix, agree one number that should move and check it a month later. If lead response time was three days, the target might be same day. If proposals were chased after a week, the target might be a follow-up meeting booked before the proposal is even sent. Small, measurable changes build confidence with the board far faster than a big restructure.
Questions to ask before you approve a sales hire
If you’re a managing director or on the board, these are worth asking before you sign off on the headcount:
What’s our conversion rate at each stage, and how has it changed in the last year?
How many qualified opportunities does each rep handle today, and how many could they handle?
What will the new rep do in their first ninety days, and who will train them?
How will we know by month six whether the hire is working?
If those questions are hard to answer, the business probably isn’t ready to get full value from a new salesperson yet.
When hiring is the answer
Sometimes it is. If your reps are at capacity, converting well and still can’t cover the market, you need more people. The point isn’t to never hire. It’s to know which problem you have before you spend money on the solution.
A simple test: if your best rep had twice as many leads tomorrow, would they close twice as much? If yes, hire. If they’d drown in admin, chasing and quoting, fix that first.
If you do hire, set them up to succeed
When the time comes, a new salesperson ramps faster when there’s something to learn from. A written sales process with clear stage definitions, a CRM that shows them what to do next, and reporting that tells their manager where they need help. Without those, they’ll copy whatever the rep next to them does, including the workarounds.
That’s the real return on fixing the process first. It makes the team you have more productive now, and it makes every future hire more productive too.

Adam Foster
Fractional RevOps
ESSAY
Hiring More Salespeople Won't Fix a Leaky Sales Process
Hiring More Salespeople Won't Fix a Leaky Sales Process
Hiring More Salespeople Won't Fix a Leaky Sales Process
5 min
When the number is behind, the instinct is to hire. But if deals are leaking out of the middle of the pipeline, more people at the top just means more leaks.
When the number is behind, the instinct is to hire. But if deals are leaking out of the middle of the pipeline, more people at the top just means more leaks.
“Before you add headcount, find out where the deals you already have are going.”
When the number is behind, the board’s first question is usually how many more salespeople you need. It’s a fair question. It’s also often the wrong one.
Hiring is slow and expensive. If the problem is that you don’t have enough conversations, hiring might be the right answer. If the problem is that good conversations aren’t turning into revenue, it makes things worse.
The real cost of a new sales hire
The salary is the visible part. Underneath it are recruiter fees, months spent finding the right person, and a ramp-up period where they cost money and bring in little. Then there’s the time a sales manager spends onboarding them, which is time not spent coaching the people already closing deals.
None of that is a reason not to hire. It’s a reason to be sure the new person will be joining a process that can turn their effort into revenue. If deals already leak out of the middle of the pipeline, a new rep will simply generate more deals that leak.
Look at the middle of the pipeline first
Before I’d sign off on a new hire, I’d want to know a few things about the deals you already have.
Where do they stall? Most pipelines have one stage where deals pile up and quietly go stale.
Why are they lost? Not the reason in the dropdown, which is usually “price” or “no decision”. The real reason, from talking to the rep and ideally the buyer.
How long do they take? If the sales cycle has stretched over the last year, more reps won’t shorten it.
If you can’t answer those from your CRM in under ten minutes, that’s the first thing to fix. It’s also a lot cheaper than a recruiter’s fee.
Common leaks in the sales process
In my experience the answers are rarely dramatic. They’re small, boring problems that cost deals every month:
Slow lead response. Leads from marketing sit untouched for days because nobody is sure who owns them. By the time someone calls, the buyer has spoken to a competitor.
No owner for follow-up. A proposal goes out and the next step is “chase in a week”, which becomes three weeks, which becomes a lost deal marked “no decision”.
Slow quoting. Quotes take a week because they’re built by hand in a spreadsheet, and the buyer’s urgency drains away while they wait.
Poor qualification. Reps carry deals that were never going to close, so their time is spread across too many opportunities and the good ones get less attention.
Fix those and you’ve effectively added capacity to the team you already have. Your existing reps close more of what they’re already working on.
How to find the leaks in your CRM data
You don’t need a big analysis project. Four reports will show you most of it:
Stage conversion rates. What percentage of deals move from each stage to the next? A sharp drop between two stages is your leak.
Average time in stage. Where do deals sit longest? Compare won deals with lost ones. Lost deals usually stall somewhere specific.
Lead response time. How long between a lead arriving and the first sales activity? If you can’t report on this, that tells you something too.
Lost reasons with notes. Read the last twenty lost deals properly. The pattern is usually obvious once you look.
Fix the leaks in the right order
Once you’ve found the leaks, resist the urge to fix them all at once. Start with the one closest to revenue. A problem at proposal or quoting stage costs you deals that are almost won, so fixing it pays back fastest. A problem at the top of the funnel matters too, but the payback takes longer to show.
For each fix, agree one number that should move and check it a month later. If lead response time was three days, the target might be same day. If proposals were chased after a week, the target might be a follow-up meeting booked before the proposal is even sent. Small, measurable changes build confidence with the board far faster than a big restructure.
Questions to ask before you approve a sales hire
If you’re a managing director or on the board, these are worth asking before you sign off on the headcount:
What’s our conversion rate at each stage, and how has it changed in the last year?
How many qualified opportunities does each rep handle today, and how many could they handle?
What will the new rep do in their first ninety days, and who will train them?
How will we know by month six whether the hire is working?
If those questions are hard to answer, the business probably isn’t ready to get full value from a new salesperson yet.
When hiring is the answer
Sometimes it is. If your reps are at capacity, converting well and still can’t cover the market, you need more people. The point isn’t to never hire. It’s to know which problem you have before you spend money on the solution.
A simple test: if your best rep had twice as many leads tomorrow, would they close twice as much? If yes, hire. If they’d drown in admin, chasing and quoting, fix that first.
If you do hire, set them up to succeed
When the time comes, a new salesperson ramps faster when there’s something to learn from. A written sales process with clear stage definitions, a CRM that shows them what to do next, and reporting that tells their manager where they need help. Without those, they’ll copy whatever the rep next to them does, including the workarounds.
That’s the real return on fixing the process first. It makes the team you have more productive now, and it makes every future hire more productive too.