Adam Foster

Adam Foster

Fractional RevOps

ESSAY

Sales Quoting Process: How to Send Quotes the Same Day

Sales Quoting Process: How to Send Quotes the Same Day

Sales Quoting Process: How to Send Quotes the Same Day

5 min

The buyer says yes in principle, then waits a week for a quote. That gap is where competitors get back in and the urgency drains away.

The buyer says yes in principle, then waits a week for a quote. That gap is where competitors get back in and the urgency drains away.

“The moment a buyer asks for a price is the moment they're most ready to buy. Don't make them wait.”

There’s a point in most B2B sales where the buyer says something like “this looks good, can you send over pricing?” It’s the moment they’re most engaged. And in a lot of businesses, it’s followed by a week of silence while someone builds a quote.

That week costs more than it looks.

Why slow quotes lose deals

When a buyer asks for a price, they’ve usually done the hard thinking. They understand the problem, they like the solution, and they want to know whether the numbers work. Their attention is on you.

A week later, it isn’t. Urgency drains away. Other priorities take over. A competitor who quotes the next morning gets a second look. By the time your proposal arrives, the buyer has to get back into it from scratch, and some of them won’t bother.

Slow quoting rarely shows up as a lost reason in the CRM. The deal just goes quiet and eventually gets marked “no decision”. That’s why it’s such an easy problem to miss.

Why quotes take so long

The causes are usually the same:

Pricing lives in a spreadsheet that only one or two people understand, and it’s slightly different on each person’s laptop.

Every quote is built from scratch by copying the last similar one and editing it by hand.

Approvals are informal. Discounts need sign-off, but nobody is quite sure who from, so the quote sits in someone’s inbox.

The product list isn’t in the CRM, so the deal value in the pipeline is a guess until the quote is done.

What a good sales quoting process looks like

The aim is simple: a rep should be able to produce an accurate, professional quote on the same day the buyer asks for it. Most of the time, they should be able to do it without asking anyone.

That means the pricing rules are agreed and written down, the products and prices are held in one place, and anything unusual has a clear route for approval with a named person and a time limit.

None of this needs complicated technology. Most CRMs, HubSpot included, can do it out of the box. The hard part is agreeing the pricing rules, and that’s a commercial conversation, not a technical one.

How to set up quoting in your CRM

Once the rules are agreed, the build follows a clear order:

Build the product catalogue. Every product or service you sell, with current prices, units and descriptions, held in the CRM rather than a spreadsheet.

Create quote templates. Branded templates that pull in the deal, company and contact details automatically, with your standard terms included.

Set discount rules. Decide what a rep can offer without approval, and build an approval step for anything beyond it.

Connect quotes to deals. When a quote is created, the deal amount updates to match, so the pipeline shows real numbers.

Add e-signature where it fits. If your contracts allow it, letting the buyer sign the quote online removes another delay.

Discount rules that protect your margin

Discounting is where informal quoting does the most damage. Without clear rules, each rep develops their own habits, and the business ends up giving away margin it never decided to give. Simple bands work well: a small discount any rep can offer, a larger one that needs the sales director, and anything beyond that needs a conversation. Once those bands are in the CRM, every discount is visible and reportable.

Quoting for project-based or complex work

Some businesses tell me their work is too bespoke for standard quotes. Every job is different, so every quote has to be built from scratch. It’s rarely as true as it feels.

Even complex work is usually made of repeatable parts: a day rate, a set of standard packages, materials or licences with known costs, and a handful of optional extras. If those parts sit in the product catalogue, a rep can assemble most quotes from them and only price the genuinely unusual element by hand. That alone can turn a week into a day.

Where a site visit or technical survey is needed first, build that into the process as its own step, with a target turnaround. The buyer then knows what’s happening and when, rather than waiting in silence.

Proposals vs quotes

It’s worth separating the two. A proposal explains why the buyer should choose you. A quote states what they’ll pay. Many teams bundle them into one long document that takes days to write. Sending a clear quote quickly, and following it with a short call to talk it through, usually works better than a polished proposal that arrives late.

The knock-on benefits

Once quotes come from the CRM, deal values in the pipeline are real numbers rather than estimates. You can see which products are being sold, at what discount and by whom. Finance gets cleaner information for invoicing. And the forecast gets more accurate, because it’s built on what’s actually been quoted.

How to measure your quote turnaround time

If you want a quick measure of the problem, look at the last ten deals you won and check how long it took from the buyer asking for a price to the quote being sent. Then do the same for the last ten you lost. If the average is more than two days, or if the lost deals waited noticeably longer, that’s where I’d start.

Adam Foster

Adam Foster

Fractional RevOps

ESSAY

Sales Quoting Process: How to Send Quotes the Same Day

Sales Quoting Process: How to Send Quotes the Same Day

Sales Quoting Process: How to Send Quotes the Same Day

5 min

The buyer says yes in principle, then waits a week for a quote. That gap is where competitors get back in and the urgency drains away.

The buyer says yes in principle, then waits a week for a quote. That gap is where competitors get back in and the urgency drains away.

“The moment a buyer asks for a price is the moment they're most ready to buy. Don't make them wait.”

There’s a point in most B2B sales where the buyer says something like “this looks good, can you send over pricing?” It’s the moment they’re most engaged. And in a lot of businesses, it’s followed by a week of silence while someone builds a quote.

That week costs more than it looks.

Why slow quotes lose deals

When a buyer asks for a price, they’ve usually done the hard thinking. They understand the problem, they like the solution, and they want to know whether the numbers work. Their attention is on you.

A week later, it isn’t. Urgency drains away. Other priorities take over. A competitor who quotes the next morning gets a second look. By the time your proposal arrives, the buyer has to get back into it from scratch, and some of them won’t bother.

Slow quoting rarely shows up as a lost reason in the CRM. The deal just goes quiet and eventually gets marked “no decision”. That’s why it’s such an easy problem to miss.

Why quotes take so long

The causes are usually the same:

Pricing lives in a spreadsheet that only one or two people understand, and it’s slightly different on each person’s laptop.

Every quote is built from scratch by copying the last similar one and editing it by hand.

Approvals are informal. Discounts need sign-off, but nobody is quite sure who from, so the quote sits in someone’s inbox.

The product list isn’t in the CRM, so the deal value in the pipeline is a guess until the quote is done.

What a good sales quoting process looks like

The aim is simple: a rep should be able to produce an accurate, professional quote on the same day the buyer asks for it. Most of the time, they should be able to do it without asking anyone.

That means the pricing rules are agreed and written down, the products and prices are held in one place, and anything unusual has a clear route for approval with a named person and a time limit.

None of this needs complicated technology. Most CRMs, HubSpot included, can do it out of the box. The hard part is agreeing the pricing rules, and that’s a commercial conversation, not a technical one.

How to set up quoting in your CRM

Once the rules are agreed, the build follows a clear order:

Build the product catalogue. Every product or service you sell, with current prices, units and descriptions, held in the CRM rather than a spreadsheet.

Create quote templates. Branded templates that pull in the deal, company and contact details automatically, with your standard terms included.

Set discount rules. Decide what a rep can offer without approval, and build an approval step for anything beyond it.

Connect quotes to deals. When a quote is created, the deal amount updates to match, so the pipeline shows real numbers.

Add e-signature where it fits. If your contracts allow it, letting the buyer sign the quote online removes another delay.

Discount rules that protect your margin

Discounting is where informal quoting does the most damage. Without clear rules, each rep develops their own habits, and the business ends up giving away margin it never decided to give. Simple bands work well: a small discount any rep can offer, a larger one that needs the sales director, and anything beyond that needs a conversation. Once those bands are in the CRM, every discount is visible and reportable.

Quoting for project-based or complex work

Some businesses tell me their work is too bespoke for standard quotes. Every job is different, so every quote has to be built from scratch. It’s rarely as true as it feels.

Even complex work is usually made of repeatable parts: a day rate, a set of standard packages, materials or licences with known costs, and a handful of optional extras. If those parts sit in the product catalogue, a rep can assemble most quotes from them and only price the genuinely unusual element by hand. That alone can turn a week into a day.

Where a site visit or technical survey is needed first, build that into the process as its own step, with a target turnaround. The buyer then knows what’s happening and when, rather than waiting in silence.

Proposals vs quotes

It’s worth separating the two. A proposal explains why the buyer should choose you. A quote states what they’ll pay. Many teams bundle them into one long document that takes days to write. Sending a clear quote quickly, and following it with a short call to talk it through, usually works better than a polished proposal that arrives late.

The knock-on benefits

Once quotes come from the CRM, deal values in the pipeline are real numbers rather than estimates. You can see which products are being sold, at what discount and by whom. Finance gets cleaner information for invoicing. And the forecast gets more accurate, because it’s built on what’s actually been quoted.

How to measure your quote turnaround time

If you want a quick measure of the problem, look at the last ten deals you won and check how long it took from the buyer asking for a price to the quote being sent. Then do the same for the last ten you lost. If the average is more than two days, or if the lost deals waited noticeably longer, that’s where I’d start.

Adam Foster

Adam Foster

Fractional RevOps

ESSAY

Sales Quoting Process: How to Send Quotes the Same Day

Sales Quoting Process: How to Send Quotes the Same Day

Sales Quoting Process: How to Send Quotes the Same Day

5 min

The buyer says yes in principle, then waits a week for a quote. That gap is where competitors get back in and the urgency drains away.

The buyer says yes in principle, then waits a week for a quote. That gap is where competitors get back in and the urgency drains away.

“The moment a buyer asks for a price is the moment they're most ready to buy. Don't make them wait.”

There’s a point in most B2B sales where the buyer says something like “this looks good, can you send over pricing?” It’s the moment they’re most engaged. And in a lot of businesses, it’s followed by a week of silence while someone builds a quote.

That week costs more than it looks.

Why slow quotes lose deals

When a buyer asks for a price, they’ve usually done the hard thinking. They understand the problem, they like the solution, and they want to know whether the numbers work. Their attention is on you.

A week later, it isn’t. Urgency drains away. Other priorities take over. A competitor who quotes the next morning gets a second look. By the time your proposal arrives, the buyer has to get back into it from scratch, and some of them won’t bother.

Slow quoting rarely shows up as a lost reason in the CRM. The deal just goes quiet and eventually gets marked “no decision”. That’s why it’s such an easy problem to miss.

Why quotes take so long

The causes are usually the same:

Pricing lives in a spreadsheet that only one or two people understand, and it’s slightly different on each person’s laptop.

Every quote is built from scratch by copying the last similar one and editing it by hand.

Approvals are informal. Discounts need sign-off, but nobody is quite sure who from, so the quote sits in someone’s inbox.

The product list isn’t in the CRM, so the deal value in the pipeline is a guess until the quote is done.

What a good sales quoting process looks like

The aim is simple: a rep should be able to produce an accurate, professional quote on the same day the buyer asks for it. Most of the time, they should be able to do it without asking anyone.

That means the pricing rules are agreed and written down, the products and prices are held in one place, and anything unusual has a clear route for approval with a named person and a time limit.

None of this needs complicated technology. Most CRMs, HubSpot included, can do it out of the box. The hard part is agreeing the pricing rules, and that’s a commercial conversation, not a technical one.

How to set up quoting in your CRM

Once the rules are agreed, the build follows a clear order:

Build the product catalogue. Every product or service you sell, with current prices, units and descriptions, held in the CRM rather than a spreadsheet.

Create quote templates. Branded templates that pull in the deal, company and contact details automatically, with your standard terms included.

Set discount rules. Decide what a rep can offer without approval, and build an approval step for anything beyond it.

Connect quotes to deals. When a quote is created, the deal amount updates to match, so the pipeline shows real numbers.

Add e-signature where it fits. If your contracts allow it, letting the buyer sign the quote online removes another delay.

Discount rules that protect your margin

Discounting is where informal quoting does the most damage. Without clear rules, each rep develops their own habits, and the business ends up giving away margin it never decided to give. Simple bands work well: a small discount any rep can offer, a larger one that needs the sales director, and anything beyond that needs a conversation. Once those bands are in the CRM, every discount is visible and reportable.

Quoting for project-based or complex work

Some businesses tell me their work is too bespoke for standard quotes. Every job is different, so every quote has to be built from scratch. It’s rarely as true as it feels.

Even complex work is usually made of repeatable parts: a day rate, a set of standard packages, materials or licences with known costs, and a handful of optional extras. If those parts sit in the product catalogue, a rep can assemble most quotes from them and only price the genuinely unusual element by hand. That alone can turn a week into a day.

Where a site visit or technical survey is needed first, build that into the process as its own step, with a target turnaround. The buyer then knows what’s happening and when, rather than waiting in silence.

Proposals vs quotes

It’s worth separating the two. A proposal explains why the buyer should choose you. A quote states what they’ll pay. Many teams bundle them into one long document that takes days to write. Sending a clear quote quickly, and following it with a short call to talk it through, usually works better than a polished proposal that arrives late.

The knock-on benefits

Once quotes come from the CRM, deal values in the pipeline are real numbers rather than estimates. You can see which products are being sold, at what discount and by whom. Finance gets cleaner information for invoicing. And the forecast gets more accurate, because it’s built on what’s actually been quoted.

How to measure your quote turnaround time

If you want a quick measure of the problem, look at the last ten deals you won and check how long it took from the buyer asking for a price to the quote being sent. Then do the same for the last ten you lost. If the average is more than two days, or if the lost deals waited noticeably longer, that’s where I’d start.